lab laser system
-
435nm 18W Fiber Laser Strong Blue Laser Beam
Today we are showing the 435nm 18W fiber coupled laser. The Adjustor button on the power supply is used to…
Read More » -
450nm 1~40mW Single-mode Laser System Blue Laser Beam
Shown in the video above is a 450nm 40mW single-mode laser. The laser power is adjustable from 0 to 40mW by…
Read More » -
37dBm 5W SM YDFA VS. 40dBm 10W PM YDFA
Ytterbium-doped fiber amplifier (YDFA) generates gain by pumping ytterbium-doped fiber with semiconductor laser, which is used to amplify laser signals…
Read More » -
915nm IR Fiber Coupled Laser Operation Demo
Usually we often see visible lasers, but few people will test infrared invisible lasers. Today we tested a 915nm infrared…
Read More » -
660nm 1.8W Fiber Laser VS 689nm 1.8W Fiber Laser
What I’m going to talk about is 660nm and 689nm red laser.The following video demonstrates 660nm 1800mW fiber coupled laser.…
Read More » -
1650nm 1~600mW IR Integrated Fiber Laser Source
This is a 1650nm infrared laser. The laser power supply and the laser output part are integrated in one chassis.…
Read More » -
12W High Power Semiconductor Laser 637nm Red Laser Beam
This is 637nm 12W Red Laser source. The laser head has a heat sink at the bottom. There is a…
Read More » -
1030nm~1070nm 200mW 23dBm Yb-doped PM Fiber Amplifier
Ytterbium-doped fiber amplifier (YDFA) generates gain by pumping ytterbium-doped fiber with a semiconductor laser, and is used to amplify laser…
Read More » -
976nm 9W Fiber Laser Customizable Invisible Laser Beam
Today we are explain about 976nm 9W multimode fiber laser source. The laser power is adjustable, and the laser output…
Read More » -
CivilLaser’s 455nm 18W Lab Laser System
This is 455nm 18W blue laser system. The laser head is equipped with a heat sink. The heat sink has…
Read More »