435nm 18W Fiber Laser Strong Blue Laser Beam
Today we are showing the 435nm 18W fiber coupled laser. The Adjustor button on the power supply is used to adjust the working current, and the laser output power can be adjusted by adjusting the current.
The laser supports CW continuous working and Modulation working mode, which can be adjusted by the slider button on the back of the laser power supply.
Laser output without fiber optic installed.
The fiber is pluggable. Here the optical fiber interface at the laser module end is FC/PC, align the buckle, insert the fiber, and tighten the fixing nut.
Laser output after installing the optical fiber.